Bastuck Rear silencer with double tailpipe carbon 2x Ø 90mm LH+RH (RACE look), with valve control - 19+ BMW 3 Series G20/G21 320i/330i (models w/o serial valve control)

Bastuck Rear silencer with double tailpipe carbon 2x Ø 90mm LH+RH (RACE look), with valve control - 19+ BMW 3 Series G20/G21 320i/330i (models w/o serial valve control)

SKU: BMWG20-K/Q90RC+S
Category: BMW 3 Series Exhaust
Manufacturers:

2.613,00 €

Final price* , plus

order article
Delivery time: 7 Workdays (DE - int. shipments may differ)

Description
Reviews

Bastuck Rear silencer with double tailpipe carbon 2x Ø 90mm LH+RH (RACE look), with valve control

fits:
19+ BMW 3 Series G20/G21 320i/330i (models w/o serial valve control)

Rear silencer with double tailpipe 2x Ø 90mm LH+RH (RACE look), cut obliquely at 30°, with valve control

Authorization: ECE-Approval
Tube diameter: 85 mm

On models which have the standard M-rear valance, it is recommended to use the rear valance attachement BMWG20-HE1 when installing the rear silencer BMWG20-K/Q90R...!

- - - > To the assembly instructions for the valve control! < - - -

Using the remote control AG/FB-EP, the exhaust flap can be opened manually. It will be opened permanently afterwards. Not permitted in public road traffic! The remote control is included when purchasing the rear silencers with exhaust flap!

Function of the valve control:
A special control unit monitors the vehicle’s speed If the speed exceeds a fixed value (70 km/h), the exhaust flap’s servomotor receives a signal to open. The exhaust gas flow is then bypassed and you get a different sound. If the speed of the vehicle drops below the fixed value (70 km/h), the exhaust flap closes again automatically.

FAQ for exhaust flap control here!

Important note on installing Bastuck components:

Please note that Bastuck sports exhaust systems are generally designed for optimal performance with larger pipe diameters and adapted pipe runs.

Possible adjustments:

- Due to the different dimensions and pipe routing compared to standard systems, adjustments may be necessary during installation.
- Since Bastuck has developed certain components (e.g., center silencers) as part of a complete exhaust system, smooth integration into standard systems is not always guaranteed.
- Possible adjustments may affect the length and/or bends of the pipes.

Recommendation for installation by a specialist workshop:

Bastuck strongly recommends having installation carried out by a qualified specialist workshop. This specialist workshop has the necessary expertise and equipment to professionally carry out any necessary adjustments and ensure an optimal fit.

Product safety information

Manufacturer information:

BASTUCK & Co GmbH
In Bommersfeld 11
Saarland
Lebach, Deutschland, 66822
service@bastuck.de
https://www.bastuck.de/de/

Responsible person:

BASTUCK & Co GmbH
In Bommersfeld 11
Saarland
Lebach, Deutschland, 66822
service@bastuck.de

There are no reviews yet.