Bastuck Rear silencer with simple tailpipe 1x Ø?100 mm LH+RH (RACE look), with exhaust flap incl. kit 1)
fits:
19+ BMW 1 Series F40 116i/118i
Rear silencer with simple tailpipe 1x Ø?100 mm LH+RH (RACE look), with exhaust flap incl. kit 1)
Authorization: ECE-Approval
Tube diameter: 76 mm
The rear silencers cannot be mounted on their own. To mount the rear silencer the brackets BMWF40-BRKT1 and BMWF40-BRKT2 are required. When mounting the rear silencer on vehicles without M-Kit the original rear valance has to be cut RH. When mounting the rear silencer on vehicles with M-Kit, we recommend mounting the rear valance insert BMWF40-HE1. In this case the holders BMWF40-BRKT1 and BMWF40-BRKT2 are not required!
1) The kit contains the exhaust flap actuator, cable harness including control unit and remote control.
- - - > To the assembly instructions for the sport exhausts and for the valve control! < - - -
Using the remote control AG/FB-EP, the exhaust flap can be opened manually. It will be opened permanently afterwards. Not permitted in public road traffic! The remote control is included when purchasing the rear silencers with exhaust flap!
Function of the valve control:
A special control unit monitors the vehicle’s speed If the speed exceeds a fixed value (70 km/h), the exhaust flap’s servomotor receives a signal to open. The exhaust gas flow is then bypassed and you get a different sound. If the speed of the vehicle drops below the fixed value (70 km/h), the exhaust flap closes again automatically.
FAQ for exhaust flap control here!
Important note on installing Bastuck components:
Please note that Bastuck sports exhaust systems are generally designed for optimal performance with larger pipe diameters and adapted pipe runs.
Possible adjustments:
- Due to the different dimensions and pipe routing compared to standard systems, adjustments may be necessary during installation.
- Since Bastuck has developed certain components (e.g., center silencers) as part of a complete exhaust system, smooth integration into standard systems is not always guaranteed.
- Possible adjustments may affect the length and/or bends of the pipes.
Recommendation for installation by a specialist workshop:
Bastuck strongly recommends having installation carried out by a qualified specialist workshop. This specialist workshop has the necessary expertise and equipment to professionally carry out any necessary adjustments and ensure an optimal fit.
Product safety information
Manufacturer information:
BASTUCK & Co GmbH
In Bommersfeld 11
Saarland
Lebach, Deutschland, 66822
service@bastuck.de
https://www.bastuck.de/de/
Responsible person:
BASTUCK & Co GmbH
In Bommersfeld 11
Saarland
Lebach, Deutschland, 66822
service@bastuck.de
There are no reviews yet.
