Bastuck Rear silencer with single tailpipe LH + RH 1 x Ø 110 mm, carbon, cut 25° (RACE design) with exhaust flap
fits:
20+ VW Golf 8 GTI Clubsport
Rear silencer with single tailpipe LH + RH 1 x Ø 110 mm, carbon, cut 25° (RACE design) with exhaust flap
Authorization: ECE-Approval
Tube diameter: 76 mm
Attention: Only the complete system can be mounted. The front link pipe VWG8-1P only has ECE approval when mounted in combination with the rear silencers with exhaust flap VWG8(/CS)-K/…
- - - > To the assembly instructions for the sport exhausts and for the valve control! < - - -
Using the remote control AG/FB-EP, the exhaust flap can be opened manually. It will be opened permanently afterwards. Not permitted in public road traffic! The remote control is included when purchasing the rear silencers with exhaust flap!
Function of the valve control:
A special control unit monitors the vehicle’s speed If the speed exceeds a fixed value (70 km/h), the exhaust flap’s servomotor receives a signal to open. The exhaust gas flow is then bypassed and you get a different sound. If the speed of the vehicle drops below the fixed value (70 km/h), the exhaust flap closes again automatically.
FAQ for exhaust flap control here!
Important note on installing Bastuck components:
Please note that Bastuck sports exhaust systems are generally designed for optimal performance with larger pipe diameters and adapted pipe runs.
Possible adjustments:
- Due to the different dimensions and pipe routing compared to standard systems, adjustments may be necessary during installation.
- Since Bastuck has developed certain components (e.g., center silencers) as part of a complete exhaust system, smooth integration into standard systems is not always guaranteed.
- Possible adjustments may affect the length and/or bends of the pipes.
Recommendation for installation by a specialist workshop:
Bastuck strongly recommends having installation carried out by a qualified specialist workshop. This specialist workshop has the necessary expertise and equipment to professionally carry out any necessary adjustments and ensure an optimal fit.
Product safety information
Manufacturer information:
BASTUCK & Co GmbH
In Bommersfeld 11
Saarland
Lebach, Deutschland, 66822
service@bastuck.de
https://www.bastuck.de/de/
Responsible person:
BASTUCK & Co GmbH
In Bommersfeld 11
Saarland
Lebach, Deutschland, 66822
service@bastuck.de
There are no reviews yet.
