4PCS
Toe in/Toe out
Toe is measured at the center of the wheels from one wheel rim to the other. When the distance is greater at the rear of the wheels, it is called toe-in. When the distance is greater at the front of the wheels, it is called toe-out. In other word, Toe in is the measurement between the leading edge of the front tires as compared to the trailing edge of the same tires.
For example, in a rear wheel drive car, increased front toe in can provides greater straight-line stability at the cost of some sluggishness of turning response. The wear on the tires is marginally increased as the tires are under slight side slip conditions.
HARDRACE adjustable rear toe arms allow you to set the rear toe as required, be it toe in to generate heat more quickly and increase turn in stability or toe out to make the car more nervous and quicker to change direction for drifting or tight circuit work.
Camber
Camber is the inward or outward tilt of the wheels when viewed from the front of the vehicle. The amount of tilt is measured in degrees from the vertical and is called the camber angle.
If the wheel tilts out at the top, the camber angle is positive and if the wheel tilts in at the top it is negative.
Camber alters the handling qualities of a particular suspension design; Negative camber usually improves grip when cornering. This is because it places the tire at a better angle to the road, transmitting the forces through the vertical plane of the tire rather than through a shear force across it. HARDRACE adjustable camber kits allow you to set the camber correctly and easily.
- Hardrace exclusive rubber achieves a balance of hardness and flexibility
- Enhances the durability of bushings
- High strength and anti-crack material extends the lifetime of rubber bushings significantly
- Viscosity between rubber and metal is about 2000 kg
Hardrace adjustment kit reduces tire wear and increase tire durable. Made with harden rubber or pillow ball bushing, provide advanced stability and accurate response steering, especially during high speed driving and cornering.
- One-piece, OE design
- Camber adjustment
- Provides stability
- Assists to reduce chassis twist and flex
- Increases steering response
- ED process and painting for extended control arm life