A clutch kit is composed of a pressure plate, a disc and a release bearing. The clutch is absolutely necessary when it comes to transfer the power from your engine to the wheels. With extra torque and power your engine is creating, your original clutch will be slipping and will not do its task properly.
A performance clutch from ACT will perform 20% better than the original from the start, depending on your set up, drag racing, auto Cross, street racing, time attacks ect. ACT can provide you a clutch kit able to absorb 400% increase in torque Capacity.
Next to the most popular Heavy Duty system, ACT offers many different type of clutches to give important clamp load increase.
This kit features ACT's Xtreme pressure plate. ACT pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency.
ACT's 4-pad rigid race discs are made with high quality, ceramic friction materials. The chrome-moly hub is heat-treated for strength and durability. The lightweight, rigid design allows for quicker shifts and smooth, trouble-free service. With the 4-pad rigid race disc, engagement is harsher, but shifting is faster. The 4-pad rigid race disc is well-suited for the smaller disc sizes in smaller engines.
Feel:Moderate to heavy pedal effort, aggressive engagement, increased gear rattle.
Life:Moderate friction life, extended by ACT's exclusive diaphragm design, rigid design may increase spline wear.
Quality:Carefully engineered, precisely assembled, accurately balanced, uses select ceramic friction materials for high heat tolerance and maximum performance
Recommendation:Recommended for race use.
Difference:100% clamp load tested and dynamically computer balanced for smooth high RPM reliability.
Disc Diameters (Inches): 8.4
Disc Diameters (Millimeters): 214
Material: Ceramic
Weight: 10.0 lbs (approx. 4,54 kg)
Spline Count: 24
Spline Size (Inches): 1-1/32
Torque Capacity (ft/lbs.): 435
Torque Capacity (Nm): 589
Torque Capacity over OE: 128%
What's Included in this kit?-
4214010A - ACT Race Disc (4-Pad Rigid)-
AT78 - ACT Alignment Tool-
H024X - ACT Pressure Plate P/PL Xtreme-
PBNA004 - ACT Pilot Bushing-
RB313 - ACT Release Bearing
Note: All non Type-S RSX models and 01-05 Civic Si models must use ACT Flywheel or factory RSX Type S Flywheel (Not included in Kits).
- Acura RSX Base 2002 2.0L L4 1998cc 122 CID
- Acura RSX Base 2003 2.0L L4 1998cc 122 CID
- Acura RSX Base 2004 2.0L L4 1998cc 122 CID
- Acura RSX Base 2005 2.0L L4 1998cc 122 CID
- Acura RSX Base 2006 2.0L L4 1998cc 122 CID
- Acura RSX Type-S 2002 2.0L L4 1998cc 122 CID
- Acura RSX Type-S 2003 2.0L L4 1998cc 122 CID
- Acura RSX Type-S 2004 2.0L L4 1998cc 122 CID
- Acura RSX Type-S 2005 2.0L L4 1998cc 122 CID
- Acura RSX Type-S 2006 2.0L L4 1998cc 122 CID
- Acura TSX Base 2004 2.4L L4 2354cc
- Acura TSX Base 2005 2.4L L4 2354cc
- Acura TSX Base 2006 2.4L L4 2354cc
- Acura TSX Base 2007 2.4L L4 2354cc
- Acura TSX Base 2008 2.4L L4 2354cc
- Honda Accord 2003-2008 2.0L L4 1998cc (K20A6/K20Z2)
- Honda Accord 2003-2008 2.4L L4 2354cc (K24A3) (Note: Must be used with EP3/DC5 (original or ACT) flywheel)
- Honda Civic 2001-2005 2.0L L4 1998cc Type-R (K20A2)
- Honda Civic 2007-2008 2.0L L4 1998cc (K20Z4)
- Honda Civic 2008-2011 2.0L L4 1998cc (K20Z4)
- Honda Integra 2001-2006 2.0L L4 1998cc Type-R (K20A)
