We here at Mishimoto are very excited to see the first turbocharged Honda engine in the US domestic market. It may be small, but it still packs a punch for having a displacement of only 1.5L. The Mishimoto Civic catch can will make sure that your 1.5L turbocharged engine keeps running like it just rolled off the assembly line. The 2-port baffled catch can mounts in the back of the engine bay by means of the included application-specific bracket. The 50 micron bronze filter keeps blow-by from making a mess of your intake tract. This 2015+ Civic catch can kit includes direct-fit silicone hoses to make for an easy 30 minute installation. The included Mishimoto Lifetime Warranty ensures that your Civic will always have the protection it needs! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either. - Direct fit for 2017+ Honda Civic 1.5 Turbo - Single can mounts in line with the PCV system to separate oil from air using a 50 micron bronze filter - Installs in under 30 minutes - Application-specific bracket mounts the can in a serviceable location - Billet 6061 aluminum sealed can - Internal air diverter turbulates air longer to improve oil separation - Defends intercooler, intake system, and essential components from oil blow-by - Helps maintain proper octane levels to reduce potential detonation - Hoses available in black or blue - Mishimoto Lifetime Warranty Overall Height 96.5 mm Inlet 3/8" Outlet 3/8" Drain Plug Thread Size 3/8" NPT Capacity 88 ml Purchase Includes (1) Compact Baffled Oil Catch Can (1) Application-Specific Mounting Bracket (2) Direct-Fit Hoses (2) 3/8" Aluminium Barbed Fittings (4) Worm Gear Clamps Mounting Hardware Mishimoto Lifetime Warranty Fits 2016+ Honda Civic 1.5T 2017+ Honda Civic Si Engine Codes L15B7 Chassis Codes FC1 FC3 FK7 Material 6061 Aluminum Install Torque Specs 22 in-lbs (2.5 Nm) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3 Nm. Do not exceed the maximum torque rating of 27 in-lbs (3 Nm). Note Only fits with left-hand drive models. After installation, Mishimoto recommends checking the contents of the Mishimoto baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.
There are no reviews yet.
Please see our privacy notice